product name: car air pump
product brand: RUNDONG AUTO ACCESSORIES
product size: about 15cm*21cm
product material: ABS
Weight: gross weight (approximately) 1.1g
Power cord length: about 285cm
product packsaging: color box packsaging color box size 170mm*100mm*220mm
output power: 120 (W)
rated voltage: DC12 (V)
Inflatable flow rate: 35L/min
Lighting: 4 LEDs
Carton size : 53cm*36.5cm*47cm
Outer box entry number: 20pcs/ctn
1, this machine is suitable for 12V car tires,
2, also applies to motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys and so on.
3, on the highway, in the wild or in the morning to work, the tires suddenly leaked or the tires of the tires, can play the first aid.
4, car tires maintain the correct tire pressure, to ensure safe driving, and save gasoline, with the car, just in case, the endless use.
5, with a full set of inflatable nozzles, can be used for tires, rubber boats, air cushions, inflatable toys, ball inflatable and many other uses.
Instructions for use:
1. Insert the nozzle at the top of the rubber tube directly into the tire valve. When the sound of the air leaking from the tire is heard, it means that the air has already circulated, and the air nozzle is continued to be tightened, and the air is no longer leaked.
2. Insert into the DC12V cigarette lighter
3. When inflating, the meter pointer increases with the saturation of the tire. When the pointer reaches the appropriate tire pressure (the tire pressure of the car tire is 223kpa=35PSI), the plug and the nozzle are taken out, and the work is completed.
4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the ball and other gas-demanding equipment.
1, can not be used in large and overweight vehicle tire inflation, such as trucks, large trucks, box trucks, etc.;
2, please use the car engine to enhance the power when using, do not consume car battery power;
3. This machine is limited to DC (DC12V) power supply. Do not use household high voltage AC (AC220V) power supply;
4. When inflating, please stop after 10 minutes of continuous operation for 10 minutes to prevent damage to the air pump and accessories, and extend the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5. When the general tire is inflated, it can reach 30PSI normal tire pressure in about 3-5 minutes, and the big tire will be longer. If the indicator of the meter rises rapidly to 50-100PSI when starting to inflate, the air is blocked. If the air does not enter the tire, immediately remove the air nozzle connector and re-operate, otherwise the motor and the instrument may be damaged.
6. When using, do not leave the body, pay attention to the tire pressure at any time, not too saturated;
7. After the machine is used, the nozzle wrench must be straightened to avoid the rubber elastic fatigue inside;
8. The fuse of the gas pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);
9. This machine should avoid moisture, heavy fall and sand intrusion, and avoid children playing to avoid damage;
10, the pressure required for each type of tire is different, please refer to the side of the car tires, or ask the car manufacturer
product name: car air pump